Motorola Automobile Accessories F5218 Manual De Usuario

The CPU Box Splitter Cable (P.N: FKN0009) enables you to interface the MW810 Mobile 

Workstation CPU Box to a standard DVI or RGB display.

The following table describes the connectors of the MW810 CPU Box Standard RGB or DVI 

Display.

RGB or DVI

RGB or DVI signals from the personal computer to display.

USB 2.0 

USB communication between the CPU Box and a Standard RGB 

or DVI display. 
This connection also enables 5V to turn the display On/Off when 

the CPU Box is turned On/Off.

Speaker Jack

Audio from the CPU Box to display speaker.

Green Wire

Used when a 3ed party display is connected to MW810 CPU Box 

and the CPU Box is installed in a remote location inside the 

vehicle. In such configuration, turning the CPU Box On/Off during 

normal operation is hard or impossible.
This green wire connects to an external push button that provides 

“ground” connection to the CPU Box. When “ground” is toggled, 

the button operates identically as the power button on the front 

panel of the CPU Box. 

USB Connector

 

(Female type)

Speaker Jack

Standard RGB or DVI Display

MW810 Mobile Workstation CPU Box 

to Standard Display Cable

RGB Connector

Not included

DVI Connector

Green Wire

Figure 28

Connection of CPU Box Splitter Cable to a Standard Display

Adaptor Cable