Brother HL-6050D Manual De Propietario
4 - 15 OPTIONS
Optional fonts package
Optional fonts package (BS-3000)
The optional font package (BS-3000) is the CD-ROM you need for installing the 136 PostScript
®
3
™
Agfa
and TrueType Fonts.
Optional barcode fonts package
(BT-1000)
(BT-1000)
The optional Barcode fonts package (BT-1000) is the CD-ROM you need for installing the Barcode fonts.
Selecting the optional fonts
After you have installed the optional fonts, you can select optional fonts using any of the following
methods:
methods:
1
Through your application software
2
With a font selection command
3
With the control panel menu settings.
When you select fonts through your application software, follow the instructions specific to your software.
See your software manual if you need assistance. When you select fonts with a font selection command,
embed the font selection command in your program. See the Technical Reference Guide. Please call a
Brother authorized service representative or Brother Customer Service for references to the Technical
Reference Guide.
See your software manual if you need assistance. When you select fonts with a font selection command,
embed the font selection command in your program. See the Technical Reference Guide. Please call a
Brother authorized service representative or Brother Customer Service for references to the Technical
Reference Guide.
To select fonts with the control panel setting menu, follow these basic steps:
1
Press any of the
Menu
buttons (
+
,
-
,
Set
or
Back
) to take the printer off line.
2
Press
+
or
-
until
INFORMATION
appears on the LCD display.
3
Press
Set
to proceed to the next menu level, and then press
+
or
-
until
PRINT FONTS
appears.
4
Press
Set
to print the list of optional fonts.
5
Find the font number on the list.
6
Press
+
or
-
on the control panel to select
PRINT MENU
.
7
Press
Set
to proceed to the next menu level, and then press
+
or
-
to select HP LASERJET, EPSON
FX-850, or IBM PROPRINTER.
8
Press the
Set
button to select the emulation for the fonts you want to select HP LASERJET, EPSON
FX-850, or IBM PROPRINTER.
9
Press
+
or
-
button to select FONT NO, and then select the font number of the font you want.
When you select the fonts through your software or with a command, note the following:
■
You do not need to be concerned about the font control panel setting. The software or command
overrides the printer setting.
overrides the printer setting.
■
Be sure to install a fonts package that has the fonts you want. The printer automatically selects
the font that has exactly the same or similar characteristics as those you have set through the
software or with a command. If the installed fonts package does not happen to have a font of
similar characteristics, the printer will print in an unexpected font.
the font that has exactly the same or similar characteristics as those you have set through the
software or with a command. If the installed fonts package does not happen to have a font of
similar characteristics, the printer will print in an unexpected font.