Brocade Communications Systems Brocade ICX 6650 6650 Manual De Usuario

RADIUS security

Enabling SNMP to configure RADIUS

To enable SNMP access to RADIUS MIB objects on the device, enter a command such as the 
following.

Brocade(config)# enable snmp config-radius

Syntax: [no] enable snmp config-radius | config-tacac>

The config-radius parameter specifies the RADIUS configuration mode. RADIUS is disabled by 
default.

The config-tacacs parameter specifies the TACACS configuration mode. TACACS is disabled by 
default.

Identifying the RADIUS server to the Brocade device

To use a RADIUS server to authenticate access to a Brocade device, you must identify the server to 
the Brocade device. 

Example 

Brocade(config)# radius-server host 10.157.22.99

Syntax: radius-server host ip-addr | iipv6-addr | server-name [auth-port number] [acct-port 

number] 

The host ip-addr | ipv6-addr | server-name parameter is either an IP address or an ASCII text 
string.

The auth-port parameter is the Authentication port number. The default is 1645.

The acct-port parameter is the Accounting port number. The default is 1646.

foundry-802.1x-valid-lookup

7

integer

Specifies if 802.1x lookup is enabled:
0 - Disabled
1 - Enabled

foundry-MAC-based-VLAN-QOS

8

integer

Specifies the priority for MAC-based VLAN QOS: 
0 - qos_priority_0
1 - qos_priority_1
2 - qos_priority_2
3 - qos_priority_3
4 - qos_priority_4
5 - qos_priority_5
6 - qos_priority_6
7 - qos_priority_7

TABLE 8

Brocade vendor-specific attributes for RADIUS (Continued)

Attribute name

Attribute ID

Data type

Description