Brocade Communications Systems Brocade VDX 8770-4 Manual De Usuario

CAUTION
The Brocade VDX 8770-4 with DC power sources are intended for installation in restricted access areas 
only. A restricted access area is a location where access can be gained only by service personnel through 
the use of a special tool, lock and key, or other means of security, and is controlled by the authority 
responsible for the location.

CAUTION
The Brocade VDX 8770-4 with AC power sources are intended for installation in restricted access areas 
only. A restricted access area is a location where access can be gained only by service personnel through 
the use of a special tool, lock and key, or other means of security.

Safety notices

When using this product, observe the danger, caution, and attention notices in this manual. The notices are 
accompanied by symbols that represent the severity of the safety condition. 

NOTE
Translated safety notices are in the Brocade Product Safety Notices publication, which is on the CD-ROM that 
accompanies this product.

The danger and caution notices are listed in numerical order based on their IDs, which are displayed in parentheses, 
for example (D004), at the end of each notice. Use this ID to locate the translations of these danger and caution 
notices in the Brocade Product Safety Notices.

Installing an Ethernet cable, opening a 
Telnet session, and configuring the 
Brocade VDX 8770-4 date and time and 
additional system parameters. Verify and 
back up configuration.

20 minutes

Ethernet cabling (optional) for Telnet access.
Refer to the Brocade Network OS 
Administrator’s Guide.

Installing transceivers as needed

30-60 minutes 

Copper and optical transceivers and 
direct-attach cables as needed.

Attaching cables, cable ties, and cable 
guides

2-3 hours

Cables, cable ties, and cable management 
fingers.

TABLE 1

Installation tasks, time, and items required (Continued)

Installation task

Time estimate

Items required