Bradford-White Corp 238-37281-00R Manual De Usuario

 

14

 

Unless specifically ordered for operation on natural gas, this water heater is 
normally equipped for operation on liquefied petroleum (LP) gas but may be 
converted by following these gas conversion instructions. 
Caution: Make sure gas to be supplied to this water heater following the 
conversion matches the gas being converted to.

 

1.  Depress and rotate gas control knob clockwise 

 

  to the “OFF” position. 

2.  Change main gas regulator by removing cap from gas regulator.  Depress 

and rotate knob clockwise 

 

  to NAT. setting using a screwdriver.  

Replace cap. 

 

 
 
 

 
 
 
 
 
 Figure 

3 

 
 
 

 

 

 

3.  Change the pilot regulator by removing pilot regulator cap.  Depress and 

rotate knob counterclockwise 

  to the NAT. setting using a screwdriver.  

Replace cap. 

4.  Remove the outer door.  Remove, or slide open, the inner door. 
5.  Disconnect thermocouple, gas supply tube and pilot tube from the gas valve 

and remove the burner assembly from the water heater. 

6.  Remove the “RED” color coded L.P. orifice and pilot assembly and replace 

with natural gas orifice and pilot assembly provided in the cloth bag attached 
to the water heater. 

All gas conversions must be performed by qualified service personnel only.