Bradford-White Corp Water Heater 238-47878-00B 04/10 Manual De Usuario

 

   

   

 

 

 

-67-

In the following section, the instructions detail the Start-up Procedure for the Accessory Module, 
once any or all of its packages are completely installed. 
 

Route the Wire Harnesses in the Accessory Module 
Step 1:  Route all of the wire harnesses out of the openings in the bottom and left side of the Accessory 
Module.  And, hold them in place.  This is shown in Figure 102. 

 

 

 
Re-install Accessory Module Cover 
Step 2:    With all wire harnesses properly routed, place the Accessory Module cover back onto the 
Accessory Module base.  This is shown in Figure 103. 

 

 
 
 

 

Accessory 

Module 

Route the Wire 

Harnesses 

through These 

Holes 

Accessory Module 

Cover