Bodyline Products International AX3331 Manual De Usuario

Axis Nitris and Axis Fuel || english

Axis Nitris and Axis Fuel || english

18. The hand-held unit shall be detached from the power supply cord 
before cleaning.
19. The shaver shall not be used until it has dried.

PRECAUTIONS ON USING THE SHAVER
>  Do not keep the shaver in a humid place, a place where the shaver 

is exposed to splashes of water, or in high temperatures.

>  To clean the body case of the shaver, wipe it with a cloth soaked 

with a diluted water solution of a neutral detergent. Do not use thin-
ner or benzene as it will damage the plastic portions of the body.

>  Do not recharge the shaver or use it with an AC power supply when 

the room temperature is below 0° C or over 40° C. Also, never 
recharge it under direct sunlight or near a heating element such as 
heater or incandescent light.

>  Do not recharge the shaver or use it with an AC power supply in a 

humid place or a place where the shaver is exposed to splashes of 
water.

>  Do not leave the shaver unattended while it is recharged.
>  If pre-shave lotion or shaver oil sticks to the body case of the 

shaver, wipe it off completely. Otherwise, the plastic portions of the 
shaver may be damaged.

>  Before shaving, wipe off oiliness of your face. Otherwise, the shav-

ings will stick to the outer foil as the inner blade rubs against it. If 
you find the outer foil soiled, wipe it clean with tissue paper or the 
like before using the shaver.

>  Excessive application of shaver oil will also soil the outer foil. In that 

case, wipe the foil clean with tissue paper or the like before using 
the shaver. When cleaning the shaver, take care not to apply an 
excess amount of shaver oil on the inner blade and outer foil.