Wyse Network Router 1 Manual De Usuario

Chapter 3

encrypt/decrypt each frame transmitted from or received by the wireless adapter. The 
access point must recognize frames encrypted by the same key.

• Key #1 through Key #4 boxes - Enter the encryption keys provided by the network 

administrator. The WEP Key selection determines which key is used for encryption.

The Display Setup dialog box allows you to select the resolution and refresh rate for the 
monitor used with the thin client. The number of icons that can be displayed on the 
desktop depends on the desktop resolution and administrator configuration.

On thin clients that only support 8 bit color, the 1280 x 1024 resolution will be 
used to display full screen connections. The 1280 x 1024 resolution will not 
be used to display the desktop, windowed connections, or seamless 
connections.

If configured by your administrator (

Longapplicationname=yes

 as defined in 

wnos.ini), the number of icons displayed for a resolution is as follows:
• 640 x 480: Up to 8 icons are displayed.
• 800 x 600: Up to 10 icons are displayed.
• 1024 x 768: Up to 21 icons are displayed.
• 1280 x 1024: Up to 40 icons are displayed.
• 1600 x 1200: Up to 60 icons are displayed.

Use the following guidelines:
• Select best display setting on DDC monitor - If the monitor is VESA DDC2B 

(Display Data Channel) compatible, selection of this option allows the thin client to 
automatically select the best resolution and refresh rate. If your monitor is not DDC 
compatible, a Monitor does not support Plug and Play message is displayed (click OK 
to acknowledge the message and remove it from the screen).