Wyse Network Router 1 Manual De Usuario

Using and Configuring Access Connections

Ask your network administrator for the dialed server password and other 
dialog requirements.

• Enable protocol compression - When selected, allows data that is being 

communicated using the selected protocol (PPP or SLIP) to be compressed (default is 
selected).

• Auto-dial on system startup - When selected, causes the connection to be dialed 

automatically on system startup. (default is cleared).

When the Default Gateway, DNS Domain, DNS Server, and File Server 
boxes in the Network Setup dialog box are configured and Auto-dial on 
system startup is enabled, both firmware revision checking and thin client 
sign-on are active (sign-on is only active if the profile on the FTP server 
enables it).
The Default Gateway, DNS Domain, DNS Server, and File Server boxes 
are required to enable access to an FTP server after the completion of 
establishing a PPP connection. However, only the File Server path is 
required to accomplish firmware revision checking and update (the more 
complicated the network topology in the target network, the more values are 
required in order to contact the FTP server).
If both Auto-dial on system startup is selected and Auto-connect on system 
startup is selected in a PPTP connection, the dial-up connection will be 
completed before the PPTP connection is initiated.

• Enable MPPE - When selected, enables MPPE (Microsoft Point-to-Point Encryption). 

MPPE is a method of encrypting data transferred across Point-to-Point Protocol 
(PPP)-based dial-up connections or Point-to-Point Tunneling Protocol (PPTP) virtual 
private network (VPN) connections. MPPE uses the RSA algorithm for encryption and 
supports 40-bit and 128-bit session keys, which are changed frequently to ensure 
security. MPPE does not compress or expand data. 

After dialup initiation, the Dialup Status dialog box opens displaying messages and 
allowing you to refresh, reset, or disconnect the connection.