McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 Manual De Usuario
5
Configuring an E_Port Extension over an Ethernet WAN
5-23
Configuring a 1x1 Ethernet Wide Area Network
E_port Disk Streaming is disabled by default (the box is not
checked). To verify if E_port Disk Streaming has been enabled
after the network has been configured, refer to the “E_Port Disk
Streaming Settings” section in
checked). To verify if E_port Disk Streaming has been enabled
after the network has been configured, refer to the “E_Port Disk
Streaming Settings” section in
, provides network
recommendations for E_port Disk Streaming, see the “E_Port
Disk Streaming Network Recommendations” section.
Disk Streaming Network Recommendations” section.
7. Choose whether you would like to enable the Switch WWN
Proxy between Node10 and Node20. If this option is enabled, the
Fibre Channel driver will respond to Exchange Link Parameter
(ELP) requests with the World Wide Name (WWN) of the remote
Fibre Channel Switch. This option is disabled by default (the box
is not checked).
Fibre Channel driver will respond to Exchange Link Parameter
(ELP) requests with the World Wide Name (WWN) of the remote
Fibre Channel Switch. This option is disabled by default (the box
is not checked).
8. Click Next.
The Create Data Path Wizard - Finish dialog box appears.
9. Click Finish to complete the configuration of this data path and
return to the Network Map.