Melody Hi Fi Cisco Aironet 1130AG Manual De Usuario
40
78-15955-02
Checking the Access Point LEDs
If your access point is not working properly, check the Status LED on the top
panel or the Ethernet and Radio LEDs in the cable bay area. You can use the
LED colors to assess the unit status.
panel or the Ethernet and Radio LEDs in the cable bay area. You can use the
LED colors to assess the unit status.
Note
To see the Ethernet and Radio LEDs you must open the access
point cover. (Refer to the “How to Open the Top Cover” section
on page 2.)
point cover. (Refer to the “How to Open the Top Cover” section
on page 2.)
The LED meanings are in this table.
Top of Unit
Cable Bay Area
Meaning
Status LED
Ethernet LED
Radio LED
Blue
—
—
Normal operating condition;
at least one wireless device
associated.
at least one wireless device
associated.
Light green
—
—
Normal operating condition;
no wireless device associated.
no wireless device associated.
—
Blinking
green
green
—
Transmitting or receiving
Ethernet packets.
Ethernet packets.