Maytag W10101295A Manual De Usuario

Descargar
Página de 12
2
LAUNDRY TOWER SAFETY
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. 
Read and follow the instructions provided with any tools listed 
here.
Tools Required
Location Requirements
Your laundry tower can be installed freestanding or between your 
washer and dryer. Proper installation is your responsibility.
Installation Clearances
The location must be large enough to allow the drawers to be 
fully opened.
When you are installing your laundry tower between or next to 
your washer and dryer, a spacing of 1" (2.5 cm) on the sides 
of the laundry tower is recommended to reduce noise 
transfer.
Additional spacing should be considered for ease of 
installation and servicing.
Laundry Tower Dimensions
  *Includes leveling feet
**Includes drawer front
You can be killed or seriously injured if you don't immediately 
 
You
 
can be killed or seriously injured if you don't follow 
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
⁹⁄₁₆" (14 mm) open-end 
wrench (for leveling leg 
locknuts)
Measuring tape
Level
27 
⁵⁄₈
" **
(70.1 cm)
13 
¹⁄₂
"
(34.3 cm)
38
 ¹⁄₈
" *
(96.8 cm)
45
 ⁵⁄₁₆
"
(115.1 cm)
10"
(25.4 cm)