Linksys X3500 Manual De Propietario
3
Product Overview
Linksys X-Series
3
X3500
Top
Ethernet—If the LED is continuously lit, the modem router is
successfully connected to a device through that port .
Wi-Fi Protected Setup™—The LED is continuously lit when a Wi-Fi
Protected Setup™ connection is successfully established . The LED
blinks slowly while Wi-Fi Protected Setup™ is setting up a connection,
and blinks rapidly if an error occurs . The LED is off when Wi-Fi Protected
Setup™ is idle .
Wireless—Lights up when the wireless feature is enabled . It flashes
Wireless—Lights up when the wireless feature is enabled . It flashes
when the modem router is actively sending or receiving data over the
network .
WAN—Lights up green when the modem router is connected directly
WAN—Lights up green when the modem router is connected directly
to an ADSL line . Lights up blue when the modem router is set up as
a router only and is connected to the internet through a separate
modem .
Internet— Lights up green when the modem router has an Internet
Internet— Lights up green when the modem router has an Internet
connection . Flashes green while the modem router is establishing the
Internet connection . Lights up red when the modem router cannot
obtain an IP address .
Power—Lights up green when the modem router is powered on .
Power—Lights up green when the modem router is powered on .
When the modem router goes through its self-diagnostic mode during
every boot-up, the LED flashes . When the diagnostic is complete, the
LED is continuously lit . Lights up red when an error occurs .
Back
DSL port—Connects to the ADSL line .
Cable port—To use the modem router as only a router, use a network
cable to connect this port to a separate modem’s LAN/Ethernet port .
Ethernet port—Using Ethernet cables (also called network cables),
Ethernet port—Using Ethernet cables (also called network cables),
these Ethernet ports connect the modem router to computers and
other Ethernet network devices on your wired network .
USB—For network-attached storage, connect an external USB drive
USB—For network-attached storage, connect an external USB drive
to this port .
Wi-Fi Protected Setup™ button—Press this button to have Wi-Fi
Wi-Fi Protected Setup™ button—Press this button to have Wi-Fi
Protected Setup™ search for your Wi-Fi Protected Setup™-supported
wireless device .
Reset button—This button allows you to reset the router to its factory
Reset button—This button allows you to reset the router to its factory
defaults . Press and hold the Reset button for about five seconds .
Power port—The Power port connects to the included power adapter .
Power port—The Power port connects to the included power adapter .
Power button—Press | (on) to turn on the modem router .