BMW 2011 328i Sedan Manual De Propietario

mps

100

System limitations

The high-beam assistant cannot serve as
a substitute for the driver's personal judg-

ment of when to use the high beams. Therefore,
manually switch off the high beams in situations
where this is required to avoid a safety risk.

The system is not fully functional in situations
such as the following, and driver intervention
may be necessary:

In very unfavorable weather conditions,
such as fog or heavy precipitation

In detecting poorly-lit road users, such as
pedestrians, cyclists, horseback riders and
wagons; when driving close to train or ship
traffic; and at animal crossings

In tight curves, on hilltops or in depressions,
in cross traffic or half-obscured oncoming
traffic on highways

In poorly lit towns and cities and in the pres-
ence of highly reflective signs

At low speeds

When the windshield in front of the interior
rearview mirror is fogged over, dirty or cov-
ered with stickers, etc.

If the sensor is dirty. Clean the sensor on
the front of the interior rearview mirror using
a cloth moistened with a small amount of
glass cleaner.

Activating via iDrive

"Settings"

"Lighting"

"High beam assistant"

The high-beam assistant is activated and is

stored for the remote control currently in use.

Fog lamps

The parking lamps or low beams must
be switched on for the fog lamps to
operate. The green indicator lamp in

the instrument cluster lights up whenever the
fog lamps are on.
The fog lamps are switched off while you acti-
vate the headlamp flasher or switch on the high
beams.

If the automatic headlamp control is acti-
vated, the low beams will come on auto-

matically when you switch on the fog lamps.