BMW 2011 328i Sedan Manual De Propietario

Descargar
Página de 286
Wheels and tires
222
heat when tested under controlled conditions 
on a specified indoor laboratory test wheel. 
Sustained high temperature can cause the 
material of the tire to degenerate and reduce 
tire life, and excessive temperature can lead to 
sudden tire failure. The grade C corresponds to 
a level of performance which all passenger car 
tires must meet under the Federal Motor Vehi-
cle Safety Standard No. 109. Grades B and A 
represent higher levels of performance on the 
laboratory test wheel than the minimum 
required by law.
The temperature grade for this tire is 
established for a tire that is properly 
inflated and not overloaded. Excessive speed, 
underinflation, or excessive loading, either sep-
arately or in combination, can cause heat 
buildup and possible tire failure.
<
RSC – run-flat tires
You will recognize run-flat tires by a circular 
symbol containing the letters RSC on the side 
of the tire, refer to page
.
M+S
Winter and all-season tires. 
These have better winter properties than sum-
mer tires.
XL
Designation for specially reinforced tires.
Tire condition
Inspect your tires frequently for tread wear, 
signs of damage and for foreign objects lodged 
in the tread. Check the tread depth.
Minimum tread depth
The tread depth should not drop below 0.12 in/
3 mm,  although,  for  example, European legisla-
tion only specifies a minimum tread depth of 
0.063 in/1.6 mm. At tread depths below 0.12 in/
3 mm there is an increased risk of high-speed 
hydroplaning, even when only small amounts of 
water are present on the road surface.
When winter tires wear down past a tread depth 
of 0.16 in/4 mm, they become perceptibly less 
suitable for winter conditions. In the interest of 
safety, new tires should be installed.
Wear indicators in the base of the tread groove 
are distributed around the tire's circumference; 
the letters TWI, for Tread Wear Indicator, on the 
tire's sidewalls identify tires that incorporate 
these wear indicators. Once the tire tread has 
worn down to the wear indicators, the tire has 
worn to a depth of 0.063 in/1.6 mm.
Wheel/tire damage
Please note that low-profile tires cause wheels, 
tires and suspension parts to be more suscep-
tible to road hazard and consequential dam-
ages.
Unusual vibrations encountered during normal 
vehicle operation can indicate tire failure or 
some other vehicle defect. This can, for exam-
ple, be caused by driving over curbs. The same 
applies to any other abnormal road behavior, 
such as pulling severely to the right or left.
In these cases, reduce speed immedi-
ately and have wheels and tires thor-
oughly checked. To do so, drive carefully to the 
nearest BMW center or tire shop that works 
according to BMW repair procedures with cor-
respondingly trained personnel. If necessary, 
have the vehicle towed there. 
Otherwise, tire damage can pose a lethal hazard 
to vehicle occupants and other road users.
<
Online Edition for Part no. 01 41 2 604 582 - © 02/10 BMW AG