BMW 2011 328i Sedan Manual De Propietario
Technology for driving comfort and safety
90
Status display
The current status of the TPM Tire Pressure
Monitor can be displayed on the Control Dis-
play, e.g. whether or not the TPM is active.
Monitor can be displayed on the Control Dis-
play, e.g. whether or not the TPM is active.
1.
"Vehicle Info"
2.
"Vehicle status"
3.
"Tire Pressure Monitor - TPM"
The status is displayed.
Status indicator on the Control Display
The color of the tires represents the status of
the tires and the system.
A change in the inflation pressure during driving
is taken into account.
A correction is only needed if TPM indicates it.
the tires and the system.
A change in the inflation pressure during driving
is taken into account.
A correction is only needed if TPM indicates it.
Green
The inflation pressure corresponds to the
desired state.
"TPM active" appears on the Control Display.
desired state.
"TPM active" appears on the Control Display.
One wheel yellow
There is a flat tire or substantial loss of tire pres-
sure in the indicated tire.
sure in the indicated tire.
All wheels yellow
>
There is a flat tire or substantial loss of tire
pressure in several tires.
pressure in several tires.
>
The system was not reset after a wheel
change and will thus issue warnings at the
last initialized inflation pressures.
change and will thus issue warnings at the
last initialized inflation pressures.
Gray
The system cannot detect a puncture.
The reasons for this are as follows:
The reasons for this are as follows:
>
TPM is being reset.
>
Interference from systems or devices that
use the same radio frequency.
use the same radio frequency.
>
Malfunction.
Resetting the system
Each time a tire inflation pressure has been cor-
rected or a wheel or tire has been changed,
reset the system.
rected or a wheel or tire has been changed,
reset the system.
1.
"Vehicle Info"
2.
"Vehicle status"
3.
"Reset TPM"
4.
Start the engine – do not drive away.
5.
Start the initialization using "Reset TPM".
6.
Start driving.
The tires are shown in gray and "Resetting
TPM..." is displayed.
After driving a few minutes, the set inflation
pressures in the tires are accepted as the target
values to be monitored. The resetting is com-
pleted automatically as you drive. On the Con-
trol Display, the tires are shown in green and
"Status: TPM active" is displayed again.
You can stop driving at any time. The resetting
continues automatically when you resume driv-
ing.
TPM..." is displayed.
After driving a few minutes, the set inflation
pressures in the tires are accepted as the target
values to be monitored. The resetting is com-
pleted automatically as you drive. On the Con-
trol Display, the tires are shown in green and
"Status: TPM active" is displayed again.
You can stop driving at any time. The resetting
continues automatically when you resume driv-
ing.
If a flat tire is detected during the reset-
ting process, all tires are displayed in
ting process, all tires are displayed in
yellow in the Control Display. The message
"Low tire!" is shown.
"Low tire!" is shown.
<
Online Edition for Part no. 01 41 2 604 582 - © 02/10 BMW AG