BMW 2005 330xi Sedan Manual De Propietario

Descargar
Página de 223
 95
To set a compass zone, press the adjustment 
button on the bottom of the interior rearview 
mirror with a pointed object, such as a pen, for 
approx. 3-4 seconds. The number of the com-
pass zone set is shown in the display.
To change the zone setting, press the adjust-
ment button repeatedly until the display shows 
the number of the compass zone in which you 
are currently driving:
The compass is operational again after approx. 
10 seconds.
For information on the automatic dimming fea-
ture, refer to Interior and exterior mirrors, auto-
matic dimming feature, page
Calibrating the digital compass
The digital compass must be calibrated in the 
following situations:
>
C or CAL is displayed.
>
The compass shows the wrong cardinal 
direction.
>
The cardinal direction shown does not 
change although the direction of travel 
does.
>
Not all cardinal directions are shown.
Procedure
1.
Make sure that no large metal objects or 
overhead power lines are in the vicinity of 
your vehicle and that you have enough 
space to drive in a circle.
2.
Set the currently valid compass zone.
3.
Press the adjustment button to call up C or 
CAL. Then drive in one full circle at a speed 
of no more than 4 mph or 7 km/h.
If calibration is successful, the C or CAL dis-
play is replaced by the cardinal directions.
Roller sun blinds*
Rear window blind
Tap the button in the center console to raise or 
lower the roller sun blind.
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG