Bryston 120 Manual De Usuario

Setup Recommendations:                                                

Description: 

General Information:                                                             

             

Thank you for choosing a Bryston 

product. We would welcome any comments 

or suggestions you may have regarding the 

operation of your amplifier. We consider our 

customer to be Bryston,s most important re-

source and your opinion is very much appre-

ciated. In the unlikely event you have a prob-

lem with your amplifier and must return it for 

service please keep the original box and all 

packaging material. 

 

            The Bryston Po

 

werPac 60/120/300 

are high quality modular single channel 

60/120 /300 watt power amplifier intended for 

use in applications where portability, quality 

and flexibility are of prime importance. 

             

            The PowerPac is a perfect choice for 

use as a modular power amplifier which can 

be attached directly to the rear of your loud-

speaker . It can also be bolted on the wall, or 

in the wall, for utilization in audio/video sur-

round systems (left/right/center/rears) where 

a non-conspicuous power module is required. 

Another application would be in multi-room 

audio systems where single or multiple ampli-

fiers are needed to provide music to other 

rooms.   

             

We recommend that you do not place 

the amplifier in a totally enclosed area. Allow 

some space at the top, sides  as your Bryston 

amplifier relies on convection cooling and 

some air flow is desirable.  

             

            Make sure the power switch on the 

front panel of the amplifier is in the off (out) 

position. Plug the power cord into the front 

panel of the amplifier, then insert the male 

end into the wall outlet.  

             

            All Bryston amplifiers contain high 

quality, dedicated circuitry in the power sup-

plies to reject RF, line spikes and other  

power-line problems.  

             Bryston power amplifiers do not re-

quire specialized power line conditioners. 

Plug the amplifier directly into its own wall 

socket. 

 

             Connect your loudspeakers ensuring 

that the positive (red) and ground (black) ter-

minals on your amplifier are connected to the 

positive and ground terminals on your loud-

speakers.  

 

            

            The Bryston PowerPac 60 monaural 

amplifier consist of two of Bryston’s custom 

power transistors as output devices. The  

power output is 60 Watts @ 8 Ohms. 

 

 

               T

he Bryston PowerPac 120 monaural 

amplifier consist of four of Bryston’s custom 

power transistors as output devices. The  

power output is 120 Watts @ 8 Ohms. 

 

               T

he Bryston PowerPac 300 monaural 

amplifier consist of eight of Bryston’s custom 

power transistors as output devices. The  

power output is 300 Watts @ 8 Ohms.