GE PVM9005 Guia De Especificaciones

Descargar
Página de 3
Listed by 
Underwriters 
Laboratories
PVM9005DJ 
GE Profile
 Series
 
2.1 cu. ft. Over-the-Range Sensor Microwave Oven
Specification Revised 7/15
For answers to your Monogram,
® 
GE Profile
 
or GE
®
 appliance questions, visit our website 
at geappliances.com or call GE Answer Center
®
 
service, 800.626.2000.
Note: Requires 120V grounded outlet. Electrical receptacle 
must be located in cabinet above microwave oven. No additional 
wiring, venting or cabinet rebuilding necessary in many cases. 
Complete detailed, easy-to-follow installation instructions  
and convenient full-size templates are packed with the  
microwave oven.
ImportaNt INformatIoN: When installing the microwave 
oven over a range, allow minimum of 2" from bottom of microwave 
oven to top of range backguard to allow for removal of  
light covers.
VeNtIlatIoN optIoNs: The Spacemaker microwave  
ovens are designed for adaptation to the following three  
types of ventilation: 
• Outside exhaust (vertical – as shown) 
• Outside exhaust (horizontal) 
• Recirculating (non-vented ductless – see Filter Kit drawing)
INstallatIoN INformatIoN: This information is 
not intended to be used for installing unit described. Before 
installing, consult installation instructions packed with product/
kit for current dimensional data.
66" MIN.
Mounting
height
from
floor
30"
MIN.
width 
required
Exhaust outlet
connects to
3-1/4" X 10" duct
17-1/8"
(rear)
100°
Door open
(without obstruction)
16-5/32"
30
"
16-1/2"
29 15/16"
Minimum distance from
door hinge side to
adjacent wall should
equal 3/4 inch.
14 5/8"
MAX.
11 1/2"
MIN.*
*Maximum depth
with JX15
Bump Out Kit is 16".
Bump Out Kit
sold separately.
DImeNsIoNs aND INstallatIoN INformatIoN (IN INches)