Elica ECL630S2 Instruccion De Instalación
5
List of Materials
Parts supplied
Removing the packaging
CAUTION!
Remove carton carefully, Wear gloves to protect against
sharp edges.
WARNING!
Remove the protective film covering the product before
putting into operation.
• Hood
Remove carton carefully, Wear gloves to protect against
sharp edges.
WARNING!
Remove the protective film covering the product before
putting into operation.
• Hood
canopy.
• Blower.
• Duct
• Duct
transition.
• Lamp already installed.
• Grease
• Grease
filter.
•
Hardware bag with:
•
•
Use, care and installation guide
•
2 hollow wall anchors with screws to secure hood to
the wall at the bottom
the wall at the bottom
•
4 Wood screws to secure the wood support to the
wall
wall
•
4 Phillips head screws to secure the transition to the
hood outlet on the top
hood outlet on the top
•
6 Phillips head screws to secure hood to the wood
support (2 secured to wood support)
support (2 secured to wood support)
•
1 Safety screw and lock washer to secure the blower
(screw is marked with red or blue paint)
(screw is marked with red or blue paint)
•
2 Flat washers for wall anchors
Parts not supplied
Optional Accessories
•
Duct Cover
•
Heat Lamps kit (2 IR 175W)
• Backsplash
kit
Tools/Materials required
• Wire
nuts
•
Tape to mount template
•
8" rounded metal duct length to suit installation
•
Measuring tape
• Pliers
• Gloves
• Knife
• Safety
• Gloves
• Knife
• Safety
glasses
•
Electric drill with 5/16” and 3/8” Bits
• Strain
relief
• Spirit
level
• Duct
tape
• Screwdrivers:
Phillips (Posidrive) # 2
Torx # 2
• Wire
cutter/stripper
• Masking
tape
• Hammer
•
•
Saw, jig saw or reciprocating saw