Samsung NX58J7750 Uso Y Cuidado
English 11
Impor
tant saf
ety inf
ormation
•
Use a dedicated 120-volt, 60-Hz, 20-amp, AC, fused electrical circuit for this range. A
time-delay fuse or circuit breaker is recommended. Do not plug more than one appliance
into this circuit.
time-delay fuse or circuit breaker is recommended. Do not plug more than one appliance
into this circuit.
• Do not connect
the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
•
This range must be Earth grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electrical shock by providing a path for the electric
current. This range is equipped with a cord having a grounding plug. The plug must
be firmly plugged into an outlet that is properly installed and grounded in accordance
with the local codes and ordinances. If you are unsure whether your electrical outlet is
properly grounded, have it checked by a licensed electrician.
grounding will reduce the risk of electrical shock by providing a path for the electric
current. This range is equipped with a cord having a grounding plug. The plug must
be firmly plugged into an outlet that is properly installed and grounded in accordance
with the local codes and ordinances. If you are unsure whether your electrical outlet is
properly grounded, have it checked by a licensed electrician.
•
The range is supplied with a 3-pronged grounded plug. This cord must be plugged into
a mating, grounded 3-prong outlet that meets all local codes and ordinances. If codes
permit the use of a separate ground wire, we recommend that a qualified electrician
determine the proper path for this ground wire.
a mating, grounded 3-prong outlet that meets all local codes and ordinances. If codes
permit the use of a separate ground wire, we recommend that a qualified electrician
determine the proper path for this ground wire.
•
Electrical service to the range must conform to local codes. Barring local codes, it
should meet the latest ANSI/NFPA No. 70 – Latest Revision (for the U.S.) or the Canadian
Electrical Code CSA C22.1 – Latest Revisions.
should meet the latest ANSI/NFPA No. 70 – Latest Revision (for the U.S.) or the Canadian
Electrical Code CSA C22.1 – Latest Revisions.
•
It is the personal responsibility of the range owner to provide the correct electrical
service for this range.
service for this range.
Installation safety
WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the following
precautions.
precautions.
•
Have your range installed and properly grounded by a
qualified installer
qualified installer
, in accordance with the installation
instructions. Any adjustment and service should be
performed only by qualified gas range installers or
service technicians.
performed only by qualified gas range installers or
service technicians.
• Do not attempt
to service, modify, or replace your
range or any part of your range unless it is specifically
recommended in this manual. All other service should
be referred to a qualified technician.
recommended in this manual. All other service should
be referred to a qualified technician.
•
Always use new flexible connectors when installing a gas appliance. Do not use old
flexible connectors.
flexible connectors.
• Make sure
the anti-tip device is properly installed on the range. See the installation
instructions for more information.
NX58J7750SS_DG68-00623A-00_EN.indd 11
2015-01-29 12:22:58