Gaggenau CM210710 Manual
23
The coffee temperature can be set with this function.
Hold down button
q on display for at least
3 seconds.
Select
TEmP. with r or s.
Press button
q until the display flashes.
Change the setting with
r or s.
Press button
q to save the setting.
Press the
o button. Back to standby.
The current time is programmed with this function.
This is required when using the timer function. The time is
displayed in 24h mode.
This is required when using the timer function. The time is
displayed in 24h mode.
Hold down button
q on display for at least
3 seconds.
Select
TIME with r or s.
Press button
q – hours display flashes.
Change the setting with
r or s.
Press button
q – minutes display flashes.
Change the setting with
r or s.
Press button
q to save the setting.
Press the
o button. Back to standby.
The set time will be deleted
– if the main plug is disconnected,
– if the appliance is switched off with the power
– if the main plug is disconnected,
– if the appliance is switched off with the power
switch 1,
– if there is a power failure.
The current time must be set again.
The current time must be set again.
This function is used to set the time at which the appliance
automatically switches on.
automatically switches on.
Hold down button
q on display for at least
3 seconds.
Select
0N at with r or s.
Press button
q, hours display flashes.
Change the setting with
r or s.
Press button
q, minutes display flashes.
Change the setting with
r or s.
Press button
q to save the setting.
Press the
o button. Back to standby.
Temperature
Temp
normal
normal
Temp
high
high
Temp
maximum
maximum
Current time
Time
--:--
--:--
Time
14:39
14:39
Timer
ON AT
--:--
--:--
ON at
07:45
07:45