Gaggenau CM210710 Manual

ADD 8EanS is 
displayed despite a full 
bean container.

Grinder has still not been 
filled automatically.

Press the 

n buton.

The beans are too big or too 
oily – they do not slide into 
the grinding unit.

Use less oily or smaller beans. 
To remove big beans use 
a vacuum cleaner.

No hot water or steam 
discharge.

Nozzle is blocked.

Thoroughly clean nozzle.

Froth insufficient or too 
runny.

Sleeve a on nozzle 12 not in 
correct position.

Push down sleeve a on 
nozzle 12.

Unsuitable milk.

Use cold semi-skimmed milk.

Coffee is running a drop at 
a time.

Degree of grinding too fine.

Select a coarser degree of 
grinding.

The beans are too oily.

Use less oily beans.

Preground coffee too fine.

Use a coarser ground coffee. 
To rinse the appliance, follow 
the instructions “Using ground 
coffee” on page 16, but do not 
add coffee powder in the duct.

Coffee has no “crema” 
(layer or froth).

Unsuitable type of coffee.

Change the type of coffee.

Beans no longer fresh.

Use fresh beans.

Degree of grinding not 
appropriate for coffee beans.

Optimize degree of grinding.

Grinding unit is not grinding 
coffee beans.

Beans are not falling into the 
grinding unit (too oily).

Gently tap the bean container.

Descaling program does 
not start.

Current programming set to 
filter yes/new or 
change filter 
display.

Set programming to 
filter no/old. 
Before descaling the appliance, 
always remove the filter!

System too hot.

Draw off some of the hot water.

Cleaning program does 
not start.

System too hot.

Draw off some of the hot water.

filter change 
displayed.

Change filter.