Zephyr AK8100AS Manual

Ductless recirculating is intended for applications where an exhaust duct work is not possible to be installed.
When converted, the power pack functions in air “purifying” mode rather than exhausting the air.  Fumes and 
exhaust from cooking is drawn and fi ltered by a charcoal fi lter.  The air is then purifi ed and recirculated back 
into the kitchen.

We recommend to always exhaust air outside of the home by employing existing or installing new duct work, 
if possible.  The power pack is most effective and effi cient as an exhaust unit.  Only when the exhaust option 
is not possible should you use the power pack in recirculating mode.

When converted to recirculating mode, a charcoal fi lter is required to be installed on top of the standard metal 
mesh fi lter and a return air vent is needed to direct air back into the kitchen.  The standard metal mesh fi lter is 
intended to capture residue from cooking and the optional charcoal fi lter helps to purify fumes exhausted from 
cooking in recirculating mode.

Purchase recirculating kit as follows, for AK8000AS ONLY:

AK8000AS ZRC-0100  1

Charcoal fi lters must be replaced approximately every 3 months based off an average usage of 1 hour a day.

Order replacement charcoal fi lters as follows:

AK8000AS Z0F-C022  1

    Install charcoal filter (plastic side up) into 
    filter bracket. Insert tab cut-out side D of 
    charcoal filter into bracket first.  Lock 
    charcoal filter into place by pushing down 
    on side E with locking tabs.