Lynx L54PSR2NG Manual De Propietario
22
wait a few seconds and
relite a burner.
Bulk lp cylinder users
Bulk lp cylinder lines must
be properly regulated.
ensure that you are using
ensure that you are using
a 4/11 appliance regulator
supplied by
a 4/11 appliance regulator
a 4/11 appliance regulator
lynx and
a 4/11 appliance regulator
a 4/11 appliance regulator
ll
converted to
supplied by
supplied by
lp gas. also
ensure that you do not have
more than one regulator in
line.
natural gas unIts:
supply line
ensure that the supply line is
at least 3/4” inside diameter
nsure that the supply line is
nsure that the supply line is
or 1” outside diameter.
checK line p
K
K
RessuRe
natural gas inlet pressure
should be at least 7”
atural gas inlet pressure
atural gas inlet pressure
w.c
atural gas inlet pressure
atural gas inlet pressure
.
and manifold pressure not
less that 4”
and manifold pressure not
and manifold pressure not
w.c
and manifold pressure not
and manifold pressure not
. under full
and manifold pressure not
and manifold pressure not
load (with all burners on.)
checK BuRneRs foR
BlocKages
K
K
checK flame cha
K
K
R-
acteRistics.
(see indeX:
“flame, correct size” )
clean oR adJust aiR
shutteR
(see indeX: “air
shutter adjustment.”
loW or InsuffIcIent
Heat
no paRt of the gRill
should eVeR Be lined
with aluminum foil.
doing so will interfere with
airflow and can cause a low
oing so will interfere with
oing so will interfere with
heat condition.
ensure that you’ve preheated
ensure that you’ve preheated
the main burners for at
nsure that you’ve preheated
nsure that you’ve preheated
least 10 to 15 minutes with
the hood closed and the
prosear™ burner for 3
minutes.
proper leveling during instal-
proper leveling during instal-
lation is critical.
roper leveling during instal-
roper leveling during instal-
a grill that is
roper leveling during instal-
roper leveling during instal-
out of level will cause erratic
grill that is
grill that is
burner combustion and inef-
ficient, uneven heating. A
carpenter’s spirit level should
be used to level the grill both
carpenter’s spirit level should
carpenter’s spirit level should
front-to-back and side-to-side.
be used to level the grill both
be used to level the grill both
If the low heat problem
persists:
checK the gas supply
K
K
line siZing ReQuiRe-
ments.
checK the gas supply
checK the gas supply
K
K
line foR KinKs oR
damage.
Replace any damaged
supply lines.
checK the RegulatoR
make sure that the regulator
& hose assembly is the one
designed for and supplied
& hose assembly is the one
& hose assembly is the one
A yellow flame on the main
burners indicates a lack of air.
A yellow flame on the main
A yellow flame on the main
But, if the air around the grill
is dusty or if heavy grease is
But, if the air around the grill
But, if the air around the grill
present, some orange tips on
the burner flame are normal.
present, some orange tips on
present, some orange tips on
adJust the aiR shutteR
To adjust for insufficient air,
adjust the air shutter.
(see
indeX: “air s
adjust the air shutter.
adjust the air shutter.
hutter
adjust the air shutter.
adjust the air shutter.
adjustment” for
adjust the air shutter.
adjust the air shutter.
further details.)
with your lynx grill and that
ll
it is correctly set up for the
with your
with your ynx grill and that
ynx grill and that
type of fuel you are using.
ectly set up for the
ectly set up for the
(see indeX: “Regulator conver-
sion” for further details.)
the hose and regulator
provided by lynx must be
ll
used if your grill is set-up for
provided by
provided by ynx must be
ynx must be
an lp g
used if your grill is set-up for
used if your grill is set-up for
as c
used if your grill is set-up for
used if your grill is set-up for
ylinder.
used if your grill is set-up for
used if your grill is set-up for
check that there is no
physical pressure being
applied to the regulator
physical pressure being
physical pressure being
attached to the back of the
applied to the regulator
applied to the regulator
grill. the regulator contains
a flexible diaphragm and
grill.
grill. he regulator contains
he regulator contains
should not be allowed to
a flexible diaphragm and
a flexible diaphragm and
touch the grill body or its
surroundings.
checK foR oBstRuc-
tions
ensure that the burners and
drip tray are clean and free
from obstructions.
drip tray are clean and free
drip tray are clean and free
lp (propane) unIts:
is the cylindeR
almost empty?
almost-empty cylinders may
not have sufficient pressure
lmost-empty cylinders may
lmost-empty cylinders may
to run the burners at high
not have sufficient pressure
not have sufficient pressure
heat.
haV
ha
ha e the line
pRessuRe checKed By
a Qualified techni-
cian
(see indeX: “gas
Requirements” for further
details.)
flow limiting deVice
improper lighting proce-
dures may have activated
mproper lighting proce-
mproper lighting proce-
the LP cylinder’s flow control
dures may have activated
dures may have activated
device, reducing the heat
output.
To reset the flow control:
To reset the flow control:
shut off all burner
controls and close the lp
cylinder valve.
wait 30 seconds and,
very slowly, reopen the
very slowly
very slowly
cylinder valve.
, reopen the
, reopen the
WInd HIttIng grIll
wind hitting the grill while in
use, especially winds blowing
into or across the hood gap
use, especially winds blowing
use, especially winds blowing
from behind, can cause poor
oss the hood gap
oss the hood gap
performance and in some
from behind, can cause poor
from behind, can cause poor
cases can cause the control
performance and in some
performance and in some
panel to get dangerously hot.
steady or
steady or
gusty winds
can prevent
the normal
can prevent
can prevent
exhaust of hot
gases. locate
your grill away
ing winds and avoid grilling in
windy conditions.
yelloW flames