Samsung DV56H9000GP Guía De Información

3

Continuous Run Mode:
1.  Press Mixed Load Bell + Dry Level for 7 sec during Power On State (Normal User Mode).
2.  Once in Continuous Run Mode, displays “CC” for 1 sec and the number of Cycle for 1 sec and

the remaining time for 1 sec in turns.

3.  The previous cycle will restart during Continuous Run Mode until the mode is deactivated.
4.  During Continuous Run Mode, press Mixed Load Bell + Dry Level for 7 seconds to return to

normal user mode. 

Dryer must be on before Service Mode can be entered.

Upon entry into Service Mode, the Sensor Bar Touch Data will be shown (Default Service 

Mode).

To enter Service Mode, press Mixed Load Bell  and Temp Keys for 3 seconds, until dryer beeps.

- 

Press Mixed Load Bell + Temp Keys for 3 seconds in Service mode to return Normal mode.

- 

Even though entering Service mode, the operating cycle will not be influenced.

This action will put the dryer into sensor bar touch data mode.

Dryer will display Sensor Bar data. This mode is the default initial service mode.

With Power On, press Mixed Load Bell  and Temp Keys for 3 seconds.

This mode displays the total number of cycles the dryer has performed.

How to Enter:
-   To enter cycle count mode, press the Mixed Load Bell  in Service Mode. 

Displays the software version.

How to Enter:
- 

In Service Mode, press Temp until the dryer beeps.

         Software version example: In case of “U0 05”, U0 means major version “U0” 05 means minor 

version “05”.

- 

Press the Temp Key in the Software Version mode to return to Service Mode.

To avoid risk of electrical shock, personal injury or death, disconnect power to dryer before 
servicing, unless testing requires power. 

Mixed Load Bell

 +Dry Level 7 sec

DV9000HA DRY_TECH MANUAL_DC68-03171F_EN.indd   3

2014-1-17   14:00:26