Bosch HBE5451UC Manual De Propietario

14

In case of especially heavy soiling, the oven door can be 

removed for better cleaning. Normally, however, this is 

not necessary.

9

WHEN REMOVING THE OVEN DOOR:

▯

Make sure oven is cool and power to the oven 

has been turned off before removing the door. 

Failure to do so could result in electrical shock or 

burns.

▯

The oven door is heavy and parts of it are fragile. 

Use both hands to remove the oven door. The 

door front includes glass components. Handle 

carefully to avoid breakage.

▯

Grasp only the sides of the oven door. Do not 

grasp the handle as it may swing in your hand 

and cause damage or injury.

▯

Failure to grasp the oven door firmly and properly 

could result in personal injury or product damage.

▯

To avoid injury from hinge bracket snapping 

closed, be sure that both locking levers are 

securely in place before removing the door. Also, 

do not force the oven door open or closed - the 

hinge could be damaged and injury could result.

▯

Do not lay the removed door on sharp or pointed 

objects as this could break the glass. Lay the 

door on a flat, smooth surface, positioned so that 

the door cannot fall over.

Open the oven door fully.

Lock both hinges on the left and right using a locking 

pin (a).
Note:  The locking pins must be fully inserted into the 

holes in the hinges.

Grip the oven door on either side with both hands and 

close the oven door by approx. 30° (b).

Raise the oven door slightly and pull it out.
Note:  Do not fully close the oven door. The hinges 

could become bent and the enamel could be 

damaged.

Grip the oven door on either side with both hands.

Slide the hinges into the slots in the oven (a).

Note:  The notch below the hinges must engage into 

the frame of the oven (b).

Lower the door downwards.

Remove the locking pins.

9

RISK OF INJURY
Do not touch the hinge if the oven door falls out 

unintentionally or a hinge snaps closed. Call 

customer service.

You can remove the hook-in racks for easier cleaning.

Removing the hook-in racks
The hook-in racks are each fixed to the side panels of the 

cooking compartment at three points.

Grip the front of the hook-in rack and pull it to the 

middle of the cooking compartment. 
The front hook of the hook-in rack will release from the 

hole.

Fold out the hook-in rack further and pull it from the 

rear holes of the side panel.

Hold the catalytic cooking compartment panel in 

place.

Remove the hook-in rack from the cooking 

compartment.

Hold the catalytic cooking compartment panel in 

place.

Insert the hooks of the hook-in rack into the rear holes 

in the side panel.

Press the front hook of the hook-in rack into the hole.

D

E

E

D

D

E