GE CP9530SJSS Hoja De Especificaciones

Descargar
Página de 2
Specificattvion Created 1/15
Listed by 
Underwriters 
Laboratories
Important: Requires a 5" free area between 
the bottom of the cooktop to any combustible 
material, i.e., shelving. Free area not required 
when installing wall oven underneath cooktop. 
Refer to installation instructions. Requires a 15" 
minimum from cooktop to adjacent overhead 
cabinets. Units are furnished with a 48" flexible 
armored cable. 
note: 30" Ribbon cooktops are approved for use 
over select GE 27" and GE 30" Single Wall Ovens and 
Warming Drawers. Refer to cooktop and wall oven/ 
warming drawer installation instructions packed with 
product for current dimensional data. If installed 
with a GE Telescopic Downdraft System, consult both 
the cooktop and downdraft installation instructions 
packed with product before installing. Cooktop gas/
electric supply may need to be re-routed to install 
downdraft. The countertop cutout requires 23-1/2" 
minimum flat countertop surface and 25" minimum 
total countertop depth. In addition, other clearances 
to front edge of the countertop must be considered. 
Before installing, consult installation instructions 
packed with product for  current dimensional data.
 
Cutout fIller trIm kIt: A filler trim kit is 
available for use if your countertop cutout is larger 
than the dimension shown, up to 29-13/16" x 20-7/16". 
Order JXTR32B for black or JXTR32W for white, 
to reduce the cutout opening for installation of this 
cooktop. These kits may be ordered from your  
GE Dealer.  
DImensIons anD InstallatIon InformatIon (In InChes)
Cp9530sJ 
GE Café
 Series 30" Built-In Knob Control Electric Cooktop
 
KW Rating
240V 9.4
208V 8.2
Amperage
240V 39.2 Amps
208V 39.2 Amps
Note:  Check local codes for  
required breaker size
To insure accuracy, it is best to make a
template when cutting the opening in the counter
Electrical junction box 16" MIN.
below countertop
Cooktop
29-3/4"
21-3/8"
19-1/4"
28"
19-5/8" to
19-3/4"
28-1/2" to
28-5/8"
CP9530SJ, PP9030DJ, PP7030EJ, JP7030DJ,
JP5030DJ
2-1/2" MIN.
Required
1-3/4" MIN.
to rear wall
13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)
30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)
15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop
2" MIN. clearance
to side wall from cut-out
on left sides of unit and
1-1/2" clearance on
right side of unit
3-1/4" at front of unit and
6" at conduit location
approxImate CookIng DImensIons
For answers to your Monogram,
® 
GE Profile
 
or GE
®
 appliance questions, visit our website 
at geappliances.com or call GE Answer Center
®
 
service, 800.626.2000.