Monogram ZHU36RSJSS Uso Y Cuidado

When a pan is removed from the cooktop 
surface, Burner level turns off; Power arc starts to 
blink. If a pan is not detected for 25 seconds, the 
control turns off automatically, lights turn off.

A hot surface indicator light (one for each cooking 
element) will glow when the glass surface is hot 
and will remain on until the surface has cooled to 
a temperature that is safe to touch.

Timer Mode
For more information see Custom Settings, Timer 
Mode section for Multi-Timer feature. Each burner 
can be linked to a timer. Burner must be on to set 
the timer. When more than one burner is on, the 
order of the timer is from left to right.
To Turn ON Multiple Timers
1. Touch the Timer Select pad. The 

corresponding burner power level and the 
display will blink. Touch the ೸ or V arrows to 

adjust time. Timer automatically starts after 3 
seconds if there is no further action. The “ON” 
LED will light when timer is on.

2.  To set timer for the next burner, touch the Timer

Select pad. The corresponding burner power 
level and the display will blink. Touch the ೸ or V

arrows to adjust time. Timer automatically starts 
after 3 seconds if there is no further action. The 
“ON” LED will light when timer is on. Repeat the 
steps for the remaining timers.

To Turn ON Multiple Timers
Hold Timer Select pad for 3 seconds to cancel 
timer. The corresponding burner power level and 
display will blink. When the burner times out, the 
corresponding timer also times out.

13

Burner Power Level

Display

Hot Surface Indicator Light

Power Arc

Using Your Cooktop