Thermador PCG486NL Hoja De Especificaciones

Page 4 of 4

These warranties give you specific legal rights and you may have other rights that vary from state to state. Full warranty and limited warranty from date of installation. For complete warranty 
details, refer to your Use & Care manual, or ask your dealer.  

Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation 
engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model 
number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada. 
Thermador is not responsible for products that are transported from the U.S. for use in Canada.

1 800 735 4328  |  USA THERMADOR.COM  |  CANADA THERMADOR.CA  |  ©2015 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED. 

04 / 15

The gas and electrical supply must be located in an area that is accessible without requiring 

removal of the rangetop. The appliance electrical power cord and gas pipe connection are located 

on the left rear underside of the rangetop.

The junction box must be located within 3 feet (~900 mm) of the rangetop connection.

Inlet Connection: 

1

/

2

" NPT (min. 

3

/

4

" dia. flex line) 

Supply Pressure: 6" min. to 14" max. water column (14.9 mb to 34.9 mb) 
Manifold Pressure: 5" water column (12.5 mb)

Inlet Connection: 

1

/

2

" NPT (min. 

3

/

4

" dia. flex line)

Supply Pressure: 11" min. to 14" max. water column (27.4 mb to 34.9 mb) 
Manifold Pressure: 10" water column (24.9 mb)