Frigidaire FGGF3030PB Instruccion De Instalación

Descargar
Página de 32
4
INSTALLATION INSTRUCTIONS - FREESTANDING GAS RANGE
Installation with cabinets
Check location where the range will 
be installed for proper electric and 
gas supply, and stability of the fl oor.
The dimensions shown here 
must be used and are minimal 
unless otherwise stated. These 
measurements do not allow for any  
clearance below the cooking top or 
at the rear of the range. 
Contact surface must be solid and 
level. 
Things to remember:
• 
Do not seal the range to side 
cabinets.
• 
Do not pinch the power supply 
cord between the range and 
rear wall.
• 
If cabinet depth is greater than 
25”, the oven front frame must 
extend beyond cabinet front by 
1/2” minimum (See Fig. 1).
• 
All openings in the wall or 
fl oor where the range is to be 
installed must be sealed.
2”
7”
Recommended 
area for 120V outlet 
on rear of wall and 
area for thru the 
wall connection of 
pipe stub and shut-
off valve.
18”
Min. to cabinets on 
either side of range 
30”
30”
Min. height from 
cooktop to cabinets
25”
24”
*15”
23”
36”
Std.
30”
11-1/2”
Installation beside wall
If installing beside a wall, the 
minimum distance to combustible 
wall on either side of range above 
36” height should be according to 
the BTU of the largest burner (See 
Fig 2).
36±1/8”
(Adjustable)
46-5/8”
max 
door 
open
29-7/8”
25-3/4”
48-1/2”
max
30”
29-1/4”
max
door 
closed
Fig. 1
Fig. 3
Fig. 2
10-1/2”
13”
Max. 
Recommended area for thru 
the fl oor connection of gas 
pipe stub and shut-off valve.
* 9500 BTU or less  
2”
  10,000 - 16,999 BTU 
3”
  17,000 BTU or greater 
5”
*
* Models without self-clean feature 
may have an additional  7 inches 
clearance from the fl oor.