Fire Magic C430I1T1P Guía De Instalación Rápida

Descargar
Página de 2
Fig. 4-1
Cooking Grid
Flavor Grid 
Warming 
rack
Front support 
adjustment 
screws (2)
Center main burner control knob
 (only on C540i units)
Fig. 5-2
Left
main burner
control knob
Right main burner 
control knob 
Pull-out 
drip tray
Drip tray 
liners
Drip tray
(with lighting instructions)
5-Test
1.  Open the lid and remove any cover(s) of the burner(s) to be lit.
2.  Turn all gas control knobs to the OFF position.
3.  Turn the gas-supply valve on.
4.  Depress the desired control knob, and while pressing turn it counterclockwise to the HI 
LIGHT position. Once the burner lights, release the control knob. (Repeat this step for each 
additional burner.)
CAUTION: If burner does not light within 5 seconds, IMMEDIATELY depress the knob and 
turn it to the OFF position. Wait 5 minutes before repeating step 4. If the burner 
does not light after repeated attempts, refer to the Lighting Instructions in your 
Owners Manual.
Fig. 5-1 - Burner valve control knob
OFF
HI
LIGHT
LOW
T
O
 TURN OFF
T
O
 TURN 
ON
Read setting
here
HIGH to 
LIGHT
To
 Turn 
OFF
To
 T
urn 
ON
High to 
light
Read setting here
6-Propane Safety
FOR PROPANE CONFIGURATIONS; READ ALL SAFETY INSTRUCTIONS AND WARNINGS REGARDING THE USE OF PROPANE 
GAS FOUND IN YOUR OWNERS MANUAL.
WHEN OPERATING THIS 
APPLIANCE WITH PROPANE, 
ALL INSTRUCTIONS AND 
WARNINGS MUST BE 
OBSERVED. FAILURE TO DO 
SO MAY RESULT IN A FIRE 
OR EXPLOSION CAUSING 
SERIOUS INJURY OR DEATH.
    Burner
*
 
(pre-installed) 
*
 The burner  ports 
must be kept clean to 
ensure proper ignition 
and operation.
4-Grill Setup
Parts Placement Checklist
Place the following items according to their position and orientation in 
Fig. 4-1:
Flavor grids, cooking grids, warming rack.
Leave pre-installed burners in place to maintain proper alignment.
Warming Rack
The warming rack comes pre-installed. Remove zip ties before use. 
Consult the owner’s manual to remove or replace.
REV 0 - 1210260946
L-C2-410