Brodit Active Holder Tilt Swivel 978610 Prospecto
Los códigos de productos
978610
Active Holder
for PDA
For fixed installation, with PS2-cable with TX, RX, 5V
Gives a discreet, neat installation
without cables hanging over the
interior. The charging device
connects to the PDA automatically
when you put the PDA in the holder.
The holder is attached onto a tilt
swivel and can be adjusted in order
to avoid light reflection.
without cables hanging over the
interior. The charging device
connects to the PDA automatically
when you put the PDA in the holder.
The holder is attached onto a tilt
swivel and can be adjusted in order
to avoid light reflection.
Attach onto a ProClip Mounting
Platform.
Platform.
12/24 Volt. Connect the power cable
with a 1,5 A fuse. 2 A charger.
with a 1,5 A fuse. 2 A charger.
Professional installation
recommended.
recommended.
An active holder with a straight cable
with open end for fixed installation
and a PS2-cable with RX, TX, V5.
The holder can be connected directly
to a GPS receiver or used for power
supply of a Bluetooth GPS.
with open end for fixed installation
and a PS2-cable with RX, TX, V5.
The holder can be connected directly
to a GPS receiver or used for power
supply of a Bluetooth GPS.