Dacor DYRP48DSNGH Uso Y Cuidado

47

Care and Cleaning

6.  Touch Right or Left Oven Menu to select the oven to 

be cleaned.

7.  Touch 

Self Clean on the main menu.

8.  Touch 

START · CONTINUE on the 

control panel (to the right of the touch 

display).
The control panel automatically locks the oven door 

during self-cleaning. The latch prevents the door from 

being opened since the high interior oven tempera-

tures can easily cause injury. If the door is not shut, 

an error message will appear on the display. To cor-

rect the problem, touch CANCEL RIGHT or CANCEL 

LEFT and wait approximately one minute, then close 

the door. When the door is properly closed, start the 

Self Clean process again.
The display shows the Self Clean cycle status:
◊ 

Cleaning indicates that Self Clean is in process.

◊  Door is Locked indicates that the door is latched.
◊  Cooling indicates that the oven is in the "cooling 

down" portion of the Self Clean process.

If you want to stop the Self Clean cycle, touch CANCEL 

RIGHT or CANCEL LEFT. Keep in mind that the oven 

door will remain locked until it is safe enough to open. 

Door is Locked will disappear from the display when the 

door lock is released. You will still need to exercise caution 

when the door lock is released because the inside of the 

oven may still be hot.
After the Self Clean cycle is complete...
•  The door latch will release when the inside has cooled 

down.

 

Cooling and Door is Locked will disappear 

from the display.

 

Exercise caution because the oven 

will still be hot at the time the door lock is released.

•  Reinstall the convection filter and oven racks before 

using the oven. 

•  You may notice a powder ash residue in the bottom of 

the oven after self-cleaning. This condition is normal. 

Use a damp cloth or sponge to wipe up the residue 

after the oven cools down.

Self-cleaning Tips

•  If any soil remains in the oven after the Self Clean 

cycle is done, you may repeat the cycle if you want.

•  Self Clean the oven regularly to prevent excessive soil 

build-up. Doing so will make the Self Clean cycle work 

better and reduce smoke and odors.

GreenClean Cleaning System

The GreenClean cleaning feature is a quick, 

simple, steam clean process used to clean light 

soil inside the ovens. Green Clean allows you to 

save time and energy over the Self Clean pro-

cess, which should be used for heavier soil build up.

 

Also, 

unlike the Self Clean process, the Green Clean process 

may be performed on both ovens at the same time.

•  To avoid steam burns, do not pour water into an oven when 

it is hot.

•  The water remaining inside the oven will still be hot to the 

touch when the door is opened after the process is complete.

1.  Remove all utensils from the oven.
2.  Making sure the oven is cool, pour 1 1/2 cups of water 

(preferably distilled) into the recessed portion of the 

oven floor. For slightly heavier build up, you may mix 

a teaspoon of hand dishwashing soap into the water 

prior to pouring.

    continued...

Door is Locked