Moen YB5488CH Hoja De Especificaciones
2 5 3 0 0 A L MO E N D R I V E
N O R TH O L MS TE D , O H 4 4 0 7 0
C O R P O R A TE H E A D Q U A R TE R S : ( 8 0 0 ) 3 2 1 - 8 8 0 9
F A X: ( 8 0 0 ) 8 4 8 - 6 6 3 6
I N TE R N A TI O N A L : ( 4 4 0 ) 9 6 2 - 2 0 0 0
F A X: ( 4 4 0 ) 9 6 2 - 2 7 2 6
C U S TO ME R S E R V I C E ( U S A ) : 8 0 0 - 8 8 2 - 0 1 1 6
F A X: ( 8 8 8 ) 3 7 9 - 2 7 2 0
W W W . MO E N . C O M
Copyright Creative Specialties International
.
Three Post Paper Holder is
constructed of zinc.
constructed of zinc.
YB5488CH
– Three Post Paper
Holder
Chrome Finish
Chrome Finish
Cleaning Instructions:
Stock Number:___________________Three Post Paper Holder
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Three Post Paper Holder
YB5488
Kingsley® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA1458
1. Remove the mounting post from the body by loosening the set
screw .
2. Position the mounting template on the w all in the desired
location. Using a level, align the template and tape it to the w all.
3. Place each mounting post on the template.
4. One at a time, place each anchor screw through the mounting
4. One at a time, place each anchor screw through the mounting
plate, centered in the large hole. Using a Phillips screw driver,
turn the anchor screw w hile applying pressure. Screw w ill self -
drill and tap into dryw all.
turn the anchor screw w hile applying pressure. Screw w ill self -
drill and tap into dryw all.
5.
Only insert screw ½” to ¾” into dryw all.
6. After all screw s are installed, tear the template aw ay from w all.
7. Tighten all four screw s. Do not over tighten.
8. Place each post over the mounting plate (set screw dow n).
7. Tighten all four screw s. Do not over tighten.
8. Place each post over the mounting plate (set screw dow n).