Moen S611SRS Hoja De Especificaciones
Rev. 12/11
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.
2-1/2" (64mm)
MA X. DECK THICKNESS
12-7/32"
(310mm)
4-1/8"
(105mm)
CL OSED
5-7/16 (138mm)
FULL OPEN
QUICK C ONNEC T
HOSE ASSEMBL Y
HOSE ASSEMBL Y
8-21/32"
(220mm)
3-7/16"
(87mm)
6-3/32"
(155mm)
32-1/2”
(826mm)
HANDLE ESCUTCHEON DIA.
2-13/32 (61mm)
DESCRIPTION
•
Metal construction with various finishes identified by suffix
•
Flexible supplies with 3/8" compression fittings
•
Designed to be installed through 2, 1-1/4” (32mm) min. dia. holes
•
Hydrolock® quick connect installation
OPERATION
•
Lever style handle
•
Temperature controlled by 100° arc of handle travel
FLOW
• Spout flow is limited to 2.0 gpm (7.6 L/min) at 60 psi
CARTRIDGE
•
1255™ Duralast™ cartridge
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
• Complies with California Proposition 65 and with the Federal Safe
Water Drinking Act
• ADA
for lever handle
WARRANTY
•
Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
the original consumer purchaser
•
5 year warranty if used in commercial installations
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
S p e c i f i c a t i o n s
There is more than 1 version of this model.
Page down to identify the version you have.
Page down to identify the version you have.
WATERHILL™
Single-Handle Bar Faucet
Models: S611series
NOTE: DESIGNED TO INSTALL THROUGH 2 HOLES
1-1/4” (32MM) MIN. DIA. AND 4” (102MM) ON CENTER
The use of aerator part 116711
reduces flow to a maximum of
1.5 gpm (5.7L/min.)
reduces flow to a maximum of
1.5 gpm (5.7L/min.)
CRITICAL DIMENSIONS
(DO NOT SCALE)