Franke FFBP2460R Instruccion De Instalación

3

3

4

5

Before inserting the mixer in the hole in the sink 

or counter top, make sure that the rubber washer 

is properly positioned in its seat. Place the  mixer 

in the hole, orienting the spout toward the sink 

bowl.

Note: Hole should be 35mm (1-3/8”) minimum 

diameter

Rubber

Washer

2

Flush the water supply to be sure it is free of 

debris and then shut off the water supply.

Install fastening set as shown: rubber washer 

and threaded washer/nut.  Tighten the 

washer/nut with wrench. 

DO NOT ROTATE MIXER BODY

to tighten the threaded nut.

Only tighten with wrench from the underside 
of sink.

 

Ensure O-ring is in place as shown to create 

proper seal. If O-ring is missing, the faucet will 

leak. Remove the check valve from the riser 

swivel nut so the nut can be moved out of the 

way. Install hose riser into mixer body. Use 

wrench to tighten. Reinstall the check valve and 

sealing washer onto the swivel nut, hand tight.

Rubber

Washer

Washer/Nut

Position 

wrench 

on hose 

riser flats

O-ring

Remove 

check valve

Swivel nut