Viking VGBQ55424 Manual

29

Pr
oduct Car

e

28

Pr

oduct Car

e

Infrared Rotisserie Burner

Special care is not required for the infrared rotisserie burner. It is
designed as a self-contained unit. Do not attempt to clean it. Its own
operation burns off any impurities which may condense on it.

Cleaning and Maintenance

Individual part cleaning chart

Part  

What to use

How to clean

Stainless steel*

Mild detergent and warm
water or stainless steel 
cleaner

Wipe with soft cloth or
sponge. Use stainless steel
cleaner to remove fingerprints
and smudges. Rinse and dry
thoroughly.

Grill Grates

Mild detergent and warm
water or nonabrasive
household cleaners.

Wipe with soft cloth or
sponge. Rinse and dry
thoroughly. 

Briqette Trays

Mild detergent and 
warm water 

Soak in warm water and mild
detergent. For stubborn
spots, scrub with stainless or
brass bristle BBQ brush. Wipe
down with heavy-duty cloth or
sponge. Dry thoroughly.

Control knobs

Mild detergent and 
warm water or
nonabrasive household
cleaners. Do not soak.

Wipe with soft cloth or
sponge. Rinse and dry
thoroughly.

Cleaning and Maintenance

Replacing Interior Halogen Canopy Lights

DO NOT touch bulb with bare hands. Clean off any signs of oil
from the bulb and handle with a soft cloth.

1.  Unsnap glass light cover using a

screwdriver in the access groove.

2.  Firmly grasp light bulb and 

pull out.

3.  Replace with halogen bulb using volt

and wattage requirements listed on
glass cover.

4.  Replace the light cover by snapping

glass cover onto metal box.

5.  Reconnect power.  

Spider Inspection

You should inspect the burners/venturi
tubes at least once a year, or immediately
if any of the following conditions occur.

•  The smell of gas along with the burner flames appearing yellow.
•  The grill does not reach the proper temperatures.
•  The grill heats unevenly.
•  The burners make a popping noise.

CAUTION

DISCONNECT THE ELECTRIC POWER BEFORE REPLACING BULB.

access

groove

light
bulb

glass light

cover

WARNING

Spiders and insects can nest in the burners/venturi tubes of this or any
other grill, and cause the gas to flow from the front of the burner. This is
a very dangerous condition that can cause a fire to occur behind the
valve panel, thereby damaging the grill and making it unsafe to operate.