Verona VEFSGE365NW Guía De Operación

1. This appliance shall not be used for space heating. This infor-

mation is based on safety considerations.

2. AlI openings in the wall behind the appliance and in the floor

under the appliance shall be sealed.

3. Keep appliance area clear and free from combustible materi-

als, gasoline, and other flammable vapors.

4. Do not obstruct the flow of combustion and ventilation air.

5. Disconnect the electrical supply to the appliance before ser-

vicing.

6. When removing appliance for cleaning and/or service;

A. Shut off gas at main supply.

B. Disconnect AC power supply.

C. Disconnect gas line to the inlet pipe.

D. Carefully remove the range by pulling outward.

CAUTION: Range is heavy; use care in handling.

7. 

Electrical installation should comply with national and local
codes.

8. 

The installer must refers to local/national codes.

9. 

Natural gas -  4.0” W.C.P.

LP/Propane - 11.0” W.C.P.

10.  The  misuse  of  oven  door  (e.g.  stepping,  sitting,  or  leaning

on them) can result in potential hazards and/or injuries.

11.  When  installing  or  removing  the  range  for  service,  a  rolling

lift  jack  should  be  used.  Do  not  push  against  any  of  the
edges of the range in an attempt to slide it into or out of the
installation.  Pushing  or  pulling  a  range  (rather  than  using  a
lift  jack)  also  increases  the  possibility  of  bending  the  leg
spindles or the internal coupling connectors.

If  an  external  electrical  source  is  utilized,  the  installation  must
be  electrically  grounded  in  accordance  with  local  codes  or,  in
the  absence  of  local  codes,  with  the  national  Electrical  Code,
ANSI/NFPA  70.

Only  authorized  replacement  parts  may  be  used  in  performing
service  on  the  range.  Replacement  parts  are  available  from
factory authorized parts distributors. Contact the nearest parts
distributor  in  your  area.