Franke SD24 Instruccion De Instalación

2

Installation

Ensure proper hole is in place for the 

Dispenser. This Dispenser is designed 

to mount into a 1-3/8” (35mm)

mounting hole.

Mounting 

washer

3

Product will arrive with dispensing 

head already mounted in base flange.  

Remove the dispensing head

assembly from the base flange

assembly.  Insert the fill tube into the 

pump at the bottom of the dispensing 

head assembly and set this aside.

4

Unscrew the mounting nut from the 

base flange assembly.  Insert the 

base flange into the mounting hole.  

Be sure the mounting washer is in 

place between the flange and

mounting surface.

5

From underneath the mounting

surface, install the mounting nut 

onto the base flange firmly by hand 

and install the bottle into the base 

flange hand tight.

Dispensing 

head

Pump

Fill tube

6

Fill bottle with soap or lotion.

Note: For Most efficient use 

with soaps, it is recommended 

to fill the bottle 1/3 with water 

and 2/3 with soap and mix well 

using the fill tube to minimize 

clogging.

Soap or lotion

Mounting 

nut

Bottle