Avanti BCA516SS Manual De Instrucciónes
10
OPERATING YOUR BEVERAGE COOLER
It is recommended you install the appliance in a place where the ambient temperature is between 72-
78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate.
78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate.
Beverage Cooler Control Panel
1
Interior Light ON/OFF Button
5
Temperature DOWN Button
2
Temperature UP Button
6
ºF/ºC Selector Button
3
Electronic Display
7
Power Button
4
ºF/ºC Indicator Light
ON/OFF POWER
To turn ON or OFF the appliance, press the
button/mark and hold for 3 seconds.
SETTING THE TEMPERATURE CONTROL
You can press and buttons/marks to control the internal temperature .
The degrees indicators will appear in the display window.
• Your Beverage Cooler is designed to operate with at a range of 39º -45º F (4 – 7ºC).
• Your Beverage Cooler is designed to operate with at a range of 39º -45º F (4 – 7ºC).
• The temperature that you desire to set will increase 1ºF or 1ºC if you push the
button/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the
button/mark once.
NOTE:
• If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the Beverage Cooler will not start.
• When you use the Beverage Cooler for the first time or restart the Beverage Cooler after having
been shut off for a long time, there could be a few degrees variance between the temperature you
select and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the Beverage Cooler is running for a few hours everything will be back to
normal.
select and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the Beverage Cooler is running for a few hours everything will be back to
normal.
STORAGE
Many cans and bottles may differ in size and dimensions. As such the actual number of bottles you
may be able to store may vary.
may be able to store may vary.
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC
button/mark. Fahrenheit or Celsius degrees indicator will appear in green color in the temperature
display window.
button/mark. Fahrenheit or Celsius degrees indicator will appear in green color in the temperature
display window.