Maytag UXT2030ADB Instruccion De Instalación

12. Make Electrical Connection

■

Use a UL Listed/CSA Approved wire connector and connect 
the 2 white wires (A) together.

■

Use a UL Listed/CSA Approved wire connector and connect 
the 2 black wires (B) together.

■

Connect the green (or bare) ground wire (C) from the power 
supply to the green ground screw in the electrical box and 
tighten the screw securely.

Reinstall the electrical box cover.

Reconnect power.

For optional power cord kit installations, follow the instructions 
supplied with the power cord kit. See the “Assistance or Service” 
section for information on ordering.

NOTE: Use only with range hood cord connection kits that have 
been investigated and found acceptable for use with this model 
range hood.

13. Complete the Installation

■

Install a 120V, 75W maximum, incandescent light bulb with 
E26 base. See “Replacing the Incandescent Light Bulb” in the 
“Range Hood Care” section.

■

If removed previously, replace the filter. See “Metal Grease 
Filter” in the  “Range Hood Care” section.

■

Check the operation of the range hood fan and light. See the 
“Range Hood Use” section.

If the range hood does not operate, check to see whether a 
circuit breaker has tripped or a household fuse has blown. 
Disconnect the power and check the wiring connections. 

NOTE: To get the most efficient use from your new range hood, 
read the “Range Hood Use” section.

A

B

C