Summit SWC530LBISTCSSADA Manual De Propietario

 

9

You can solve many common wine cellar problems easily, saving you the cost of a 
possible service call. Try the suggestions below to see if you can solve the 
problem before calling a service technician. 

 

Wine cellar does not 
operate. 

Not plugged in. 
The appliance is turned off. 
The circuit breaker has tripped or a fuse has blown. 

Wine cellar is not cold 
enough. 

Check the temperature control setting. 
External environment may require a higher setting. 
The door is opened too often. 
The door is not closed completely. 
The door gasket does not seal properly. 

Turns on and off 
frequently. 

The room temperature is hotter than normal. 
A large number of bottles has been added to the 
wine cellar. 
The door is opened too often. 
The door is not closed completely. 
The temperature control is not set correctly. 
The door gasket does not seal properly. 

The light does not 
work. 

Not plugged in. 
The circuit breaker has tripped or fuse is blown. 
The bulb has burned out. 
The light button is “OFF”. 

Vibrations 

Check to be sure that the wine cellar is level. 

The wine cellar seems 
to be making too 
much noise. 

Some noise may come from the flow of the 
refrigerant, which is normal. 
As each cycle ends, you may hear gurgling sounds 
caused by the flow of refrigerant in your wine cellar. 
Contraction and expansion of the inside walls may 
cause popping and crackling noises. 
The wine cellar is not level. 

The door will not close 
properly. 

The wine cellar is not level. 
The door was reversed and not properly installed. 
The gasket is dirty. 
The shelves are out of position.