Marvel M18AFWPL Hoja De Especificaciones

3

Use two or more people to move product.

Failure to do so can result in back or other injury.

Your freezer has been packed for shipment with all parts 

that could be damaged by movement securely fastened. 

Remove internal packing materials and any tape holding in-

ternal components in place. The owners manual is shipped 

inside the product in a plastic bag along with the warranty 

registration card, and other accessory items. 

Keep your carton and packaging until your freezer has 

been thoroughly inspected and found to be in good condi-

tion. If there is damage, the packaging will be needed as 

proof of damage in transit. Afterwards please dispose of all 

items responsibly in particular the plastic bags which can 

be a suffocation hazard.

This merchandise was carefully packed and thoroughly 

inspected before leaving our plant. Responsibility for its 

safe delivery was assumed by the retailer upon acceptance 

of the shipment. Claims for loss or damage sustained in 

transit must be made to the retailer.

DO NOT RETURN DAMAGED MERCHANDISE TO THE 

MANUFACTURER - FILE THE CLAIM WITH THE RE-

TAILER.

If the power module was shipped or has been laying on 

its side for any period of time allow the power module to 

sit upright for a period of at least 24 hours before plugging 

in. This will assure oil returns to the compressor. Plugging 

the power module in immediately may cause damage to 

internal parts.

Child entrapment and suffocation are not problems of the 

past. Junked or abandoned freezers are still dangerous - 

even if they sit out for "just a few days".

If you are getting rid of your old freezer, please follow the 

instructions below to help prevent accidents.

Before you throw away your old freezer:

•  Take off the doors or remove the drawers.

•  Leave the shelves in place so children may not easily 

climb inside.

•  Phillips screwdriver

•  Flat blade screwdriver

•  Hex head nut drivers size 

1

⁄

4

" and 

5

⁄

16

"

•  Level

•  Drill and drill bit (#6 - .204)

•  Open end wrenchs size 

1

⁄

4

", 

7

⁄

16

" and 

1

⁄

2

"

•  Slip joint pliers

•  Adjustable wrench

•  Tape measure

•  Hex socket and ratchet size 

7

⁄

16

"

•  3/32" Hex key (Allen wrench)