Best WC26I36SB Manual De Usuario

- 4 -

The hood is operated using the (5) push buttons located 

on the front edge of the

hood.
The Light switch turns the halogen lights on and off. Push the light switch once to

turn the lights ON - push a second time to turn the lights ON to a brighter level -

push a third time to turn the lights OFF.

The Glass switch 

turns the glass light on. 

Push the glass switch once to turn the

glass light ON - push a second time to turn the light OFF. Depress and hold the

button to activate the automatic light sensor. When the LED Display indicates

“A”, the glass light will automatically light when the room becomes dark. Push a

second time to deactivate the sensor and turn the light off.

The Blower Off/Speed switch turns the blower off and changes blower speed to

four different speed settings: high, medium-high, medium-low and low speed.

Depress and hold the button for 2 seconds to turn the blower off.

The Blower On/Speed switch turns the blower on to four different speed settings:

Low, medium-low, medium-high and high speed.

The LED Display:

- Indicates blower speed selection from 1 (low speed) to 4 (high speed).

- Flashes the blower speed when the 10-minutes delay off has been activated.

- After 30 hours of operation, the center segment of the display blinks and remains

lit, indicating that filters need to be cleaned.

- Indicates “A” when the Light Sensor is ON.

The Time Delay switch activates a delay off feature. When pushed, the blower

will continue to operate at the current speed setting for 10-minutes before

automatically turning itself off.

The Filter Alarm Reset switch is used to reset the 30-hour filter timer. After filters

are cleaned or replaced, press this switch once to reset the filter clean alarm.

Your hood is equipped with a HEAT SENTRY™ thermostat. This thermostat is a

device that will turn on or speed up the blower if it senses excessive heat above

the cooking surface.

1) If blower is OFF - it turns blower ON to HIGH speed.

2) If blower is ON at a lower speed setting - it turns blower up to HIGH speed.

When the temperature level drops to normal, the blower will return to its original

setting.