U-Line BI98 Manual Suplementario
8900 North 55
th
Street ▪ Milwaukee, WI ▪ 53224-9540 ▪ 414-354-0300 ▪ (fax) 414-354-7905
BI-95
13 15/32” H x 12 15/16” W
BI-98
15 15/16”H x 13 15/16” W
29 Series
21 13/32” H x 19 13/16” W
75 Series
28 5/32" H x 22 15/16" W
75 Stainless Series
29 13/32" H x 22 15/16"W
1115 Series
26 15/16” H x 13 15/16” W
1175 Series
26 15/16” H x 22 15/16” W
¼” CUSTOM INSERT PANEL SIZES
ORIGINS
o
Zero clearance with a flush/flat door panel.
o
Door will accept a raised panel. Allow proper clearance, on hinge
side when installing a raised panel. Amount of clearance will
depend on raised panel thickness.
side when installing a raised panel. Amount of clearance will
depend on raised panel thickness.
o
The maximum panel thickness when inserted into the door reveal
(channel) is ¼” thick.
(channel) is ¼” thick.
o
For raised panels on BI 95, BI98, 29 series and 75 series models
the depth of the reveal is ¼” on both sides and bottom and ½” on
top.
the depth of the reveal is ¼” on both sides and bottom and ½” on
top.
o
For raised panels on 75 Stainless, 1115, and 1175 series models
the depth of the reveal is ¼” on both sides, bottom, and top.
the depth of the reveal is ¼” on both sides, bottom, and top.
o
Allow 9/16” clearance on hinge side for 75 Stainless models with
a flush/flat panel. Additional clearance may be needed on hinge
side when installing a raised panel. Amount of clearance will
depend on raised panel thickness.
a flush/flat panel. Additional clearance may be needed on hinge
side when installing a raised panel. Amount of clearance will
depend on raised panel thickness.
o
Panel not to exceed 20 pounds.
o
Conversion information: 1 inch = 2.54 cm
30164