Zephyr ZGEE30AS Manual De Propietario

front edge

glass handle

1.  Determine and mark center line on wall and cabinet bottom with a pencil.
2.  If the cabinet bottom is recessed, wood blocking must be installed to ensure proper          

     alignment of the hood with the cabinet bottom.  Wood blocking should be f ush  

   

     within cabinet bottom.
3.  Follow the dimensions in Fig.1 and cut-out the bottom of your cabinet to create an opening     

     for the hood to f t through.  If you have a frameless cabinet begin the 1-9/16” measurement 

     (referenced in Fig.1) from front of the cabinet door.  This way the front edge of the hood will   

     be f ush with the cabinet doors when closed, see Fig.2.