Summit REX245SSRT Manual De Propietario

1. BAKE Pad

Touch this pad to select the bake function.
BAKE Light
Flashes while in edit mode - you can change

the oven temperature this point.

2. BROIL HI/LO Pad

Touch this pad to select the broil function.
BROIL Light
Flashes while in edit mode - you can switch

from HI to LO BROIL at this point.

3. Display

Shows the operations you have selected, the

time of day and the cooking status.

4. COOK TIME Pad

Touch this pad and then touch the + or –

pad to set the amount of time you want your

food to cook. The oven will shut off when the

cooking time has run out.

5. START TIME Pad

Use along with the COOK TIME or SELF CLEAN

pad to set the oven to start and stop auto-

matically at a time you set.

6. OVEN LIGHT ON/OFF Pad

Touch this pad to turn the oven light on or off.

7. TIMER/CLOCK Pad

Touch this pad to select the timer feature.

Then press + and – pads to adjust time.
To set the clock, touch this pad and hold 3

seconds and then touch the + and – pads.

The time of day will flash in the display when

the oven is first turned on.

Throughout this manual, features and appearance may vary from your model.

Oven Control, Clock and Timer Features and Settings

8. START Pad

Must be touched to start any cooking func-

tion.

9. – Pad

Short taps to this pad will decrease the time

or temperature by small amounts. Touch and

hold the pad to decrease the time or tem-

perature by larger amounts.

10. + Pad

Short taps to this pad will increase the time or

temperature by small amounts. Touch and

hold the pad to increase the time or tem-

perature by larger amounts.

11. CLEAR/OFF Pad

Touch this pad to cancel ALL oven opera-

tions except the clock and timer.

12. SELF CLEAN Pad

Touch this pad to select the self-cleaning

function. See the Using the self-cleaning oven

section.
CLEAN Light
Flashes while in edit mode-you can change

the length of time for the self-clean cycle at

this point. Glows when the oven is in the self-

clean cycle. After the self-clean cycle, the

light will turn off. Unlatch the door.

If "F-and a number, or letter" flash in the display

and the oven control signals, this indicates a

function error code.
Touch the CLEAR/OFF pad. Allow the oven to

cool for one hour. Put the oven back into op-

eration.
If function error code repeats, disconnect

power to the oven and call for service.