Friedrich S36YF Guía De Operación

En-4

Fig. 1 Indoor Unit

1 Operating Control Panel (Fig. 2)
2 MANUAL AUTO button
3 Remote Control Signal Receiver
4 OPERATION Indicator Lamp (red)
5 TIMER Indicator Lamp (green)
6 SWING Indicator Lamp (orange)

(HORIZONTAL SWING)

7 SWING Indicator Lamp (orange)

(VERTICAL SWING)
●

If the TIMER indicator lamp flashes when
the timer is operating, it indicates that a
fault has occurred with the timer setting

(See page 16 Auto Restart).

8 Intake Grille
9 UP/DOWN Air Direction Flap
0 RIGHT/LEFT Air Direction Louvers

(behind UP/DOWN Air Direction Flap)

Fig. 4 Remote Control Unit

A SLEEP button
B MASTER CONTROL button
C SET TEMP./SET TIME buttons (

)

D Signal Transmitter
E TIMER button
F FAN CONTROL button
G START/STOP button
H AIR FLOW DIRECTION

VERTICAL SET button

I AIR FLOW DIRECTION

VERTICAL SWING button

J AIR FLOW DIRECTION

HORIZONTAL SET button

K AIR FLOW DIRECTION

HORIZONTAL SWING button

L TIME ADJUST button
M ACL button

(located inside battery compartment)

Rear side (Fig. 5)
N TEST RUN

● Touch the two metal contacts with a me-

tallic object to send the signal to perform
a test run.

● Perform a test run only when installing the

air conditioner. If the signal to perform a
test run is received during normal opera-
tion, the air conditioner’s thermostat will
malfunction.

● If the signal to perform a test run is re-

ceived during normal operation, the unit
will switch to the test operation mode and
the indoor unit’s OPERATION and TIMER
indicator lamps will flash simultaneously.

● To stop the test operation mode, press the

START/STOP button to stop the air condi-
tioner.

O Remote Control Unit Display (Fig. 6)
P Transmit Indicator
Q Clock Display
R Operating Mode Display
S T imer Mode Display
T Fan Speed Display
U Temperature Set Display
V T imer Set Indicator
W Temperature Set Indicator

9362292054_OM_en.p65

12/1/06, 16:36