Zephyr AK8300ASX Manual

Maintenance –

Cleaning and Installing Filters

SURFACE MAINTENANCE:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent,
or steel wool/ scoring pads which will scratch and damage surface. Do not use products containing chlorine
bleach or orange cleaners.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless
luster and grain. Always scrub lightly using a micro fiber or clean cotton cloth and with the grain.

Decorative Mesh and Baffl e Filters

The filters are intended to trap residue and grease from cooking. Although the fi lters should never need
replacing, they are required to be cleaned every 30 days or more often depending on cooking habits.

Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry fi lters and re-install before
using hood.

Installing Decorative Mesh Filters, FIG 4:

1. Place back of fi lter into channel on back of power pack.

2. Pull down on fi lter handle and pivot up until fi lter is fl ush

with bottom of power pack and locks into place.

Replacing Decorative Mesh Filters:

Hood Model:

Part No.

Qty. to Order

AK8200AS 50200023 2
AK8300ASX 50200023

Installing Baffle Filters, FIG 5:

1. Place fi lter into top groove of the power pack as shown and

pull towards front of power pack using handles.

2. Pivot back of fi lter upwards so it is angled in the power pack.

3. Push fi lter into channel on back of power pack to lock into place.

Replacing/Ordering Baffle Filters:

Hood Model:

Part No.

Qty. Included

AK8200AS Z0F-B082 2
AK8300ASX Z0F-B083

FIG 4

FIG 5